website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 1 m1 thru m7 surface mount ge neral rectifier reverse voltage - 50 to 1000 volts forward current - 1.0 ampere features do-214ac the plastic package carries underwriters laboratory dimensions in inches and ( millimeters ) f lammability classification 94v-0 for surface mounted applications low reverse leakage built-in strain relief,ideal for automated placement high forward surge current capability high temperature soldering guaranteed: 250 /10 seconds at terminals mechanical data case : jedec do-214ac molded plastic body terminals : solder plated, solderable per mil-std-750,method 2026 polarity : color band denotes cathode end mounting position : any weight : 0.075 grams maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified. single phase half-wave 60hz,resistiv e or inductive load,for capacit ive load current derate by 20%. symbols m1 m2 m3 m4 m5 m6 m7 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current at t l =55 i (av) 1.0 amp peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30.0 amps maximum instantaneous forward voltage at 1.0a v f 1.1 volts maximum dc reve rse current t a =25 at rated dc blocking voltage t a =100 i r 5.0 50.0 a typical junction capacitance (note 1) c j 15.0 pf typical thermal resistance (note 2) r q ja 75.0 /w operating junction and storage temperature range t j ,t stg -55 to +125, -55 to +150 note: 1.measured at 1mhz and applied reverse voltage of 4.0v d.c. 2.p.c.b. mounted with 0.2x0.2 ? (5.0x5.0mm) copper pad areas
website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 2 m1 thru m7 ratings and characterist ic curves m1 thru m7 note: specifications are subject to change without notice.
|